Product Information

Laser type

SZ-1100

The SZ-1100 is the optimum model for research & development of high-definition 3D printed objects, and 3D printing of high-mix low-volume.
The laser spot diameter can be 15μm at minimum, and a telecentric fθ lens is adopted for the optical system, which enables stable microfabrication.
The variable laser output can respond to various materials, and applications can be selected according to purpose.

SZ-2500

The SZ-2500 is a medium-size model that supports microfabrication to medium-size shaping.
The laser spot diameter is variable in a range of 50 - 300μm, which significantly improves drawing efficiency.
The 3D printing area is as wide as 250 × 250mm, where multiple small-size parts can be created simultaneously.
It is a versatile model that supports research & development through small-lot production.

DLP type

SZ-6000

The SZ-6000 realizes high-speed exposure ten times faster in exposure time than our conventional model through adoption of a newly developed DLP multiscan method.
Furthermore, high-definition drawing quality is achieved as the drawing spot size is 21.6μm and the control pitch is 0.9μm.
The 3D printing area is as large as 660 × 600 × H300mm, enabling high-volume simultaneous 3D printing in batches.
This solves mass production problems related to conventional 3D printers.
The SZ-6000 is a mass-production-oriented model that can maintain conventional drawing quality, enabling high-speed large-area 3D printing.

Equipped with functions specific to a mass-production machine

  • Equipped with an external large-capacity automatic slurry replenishment unit, which enables long-time continuous operation without running out of materials.
  • Equipped with surveillance cameras that monitor defects during 3D printing.
  • Equipped with the functions of blade cleaning and surplus slurry recovery, which enable effective use of surplus materials in 3D printing.
  • Equipped with a conveying table that smoothly carries out a green body on the stage to the cleaning process after large-area 3D printing.

List of specifications

 
  High-definition model
SZ-1100		 Productivity/3D printing area expanded model
SZ-2500		 Mass-production model
SZ-6000
3D printing area 100 × 100 × H50mm 250 × 250 × H250mm 600 × 600 × H300mm (70kg)
Layer pitch 10~200µm 50~200µm 10~200µm
Spot diameter Φ15~80µm Φ50~300µm Dot 21.6µm/Drawing pitch 0.9µm
Output power 250mW 1000mW ー
Equipment size 1300 × 1750 × H1650mm 1600 × 1850 × H1950mm 1720 × 2950 × H1870mm
Power supply Single-phase 100V AC 1.0KVA Single-phase 100V AC 1.5KVA Single-phase 200V AC 30A

Slurry dispersion

The SZ series, which aims at high-definition 3D printing, requires slurry making as microscopic particles are more highly filled. Therefore, optimum slurrying of various materials is realized by using our revolution-rotation planetary centrifugal mixer “Kakuhunter” that can adjust the ratio between revolution and rotation.

Inquiry Form